Router MikroTik RB5009UPr+S+OUT

• easy to deploy
• works well in ANY weather
• provides extensive power redundancy
• can be connected via most common networking interfaces
• has a CPU that is strong enough to take full advantage of the most powerful
• networking software in the world – RouterOS v7

Adding an IP66-rated waterproof enclosure to the RB5009 series allowed us to meet all the requirements! The brand new RB5009UPr+S+OUT is a compact, cost-effective solution that will revolutionize your network tower setups. You’re getting one of the most powerful outdoor networking devices for the best price on the market!

Like the indoor version, this RB5009 has 7x Gigabit Ethernet ports, one 2.5 Gigabit Ethernet port, a 10G SFP+ cage, and a full sized USB3 port!

When we say “extensive power redundancy”, we really mean it: the unit offers 9 possible ways of powering. There’s a 2-pin power connector on the front, as well as PoE-in and PoE-out on all eight Ethernet ports. The board can use any of these sources to power itself, choosing the one with the highest voltage when multiple sources are available. RB5009 takes up to 21W to power itself. If you’re using PoE-in, the board will stay on even if 8 of your 9 power sources suddenly go down. Unprecedented redundancy!

All power options support a wide voltage range of 24 – 57 V. However, you can not mix the voltages.

Each PoE-out port can supply up to 25W of power. All the ports combined are limited to 130W, which should be enough for most setups. You can specify maximum available power from your power sources manually, if necessary. If you’re using PoE-out to power other devices, you have to provide power via the 2-pin connector to power those.

This product also features single voltage PoE-out – it can either be 802.3at/af compatible OR low-voltage PoE-out. That is determined by the voltage on the 2-pin connector, as no voltage conversion is done on this board.

When it comes to processing power and available use-cases, this router can do it all: PPPoE termination, DHCP to customers, Local Queuing, MPLS Push/Pop/Swap and MPLS Forwarding, VPLS/VXLAN Termination, Hardware bridging, and so much more!

The RB5009 series keep redefining affordable reliability for small, medium, and even large ISPs!

Specifications
Product code    RB5009UPr+S+OUT
Architecture    ARM 64bit
CPU    88F7040
CPU core count    4
CPU nominal frequency    350-1400 (auto) MHz
Switch chip model    88E6393
RouterOS license    5
Operating System    RouterOS v7
Size of RAM    1 GB
Storage size    1 GB
Storage type    NAND
MTBF    Approximately 200'000 hours at 25C
Tested ambient temperature    -40°C to 70°C
IPsec hardware acceleration    Yes

Powering
Number of DC inputs    2 (2-pin terminal, PoE-IN)
2-pin terminal input Voltage    24-57 V
Max power consumption    150 W
Max power consumption without attachments    15 W
Cooling type    Passive
PoE in    802.3af/at
PoE in input Voltage    24-57 V

PoE-out
PoE-out ports    Ether1-Ether8
PoE out    802.3af/at
Max out per port output (input 18-30 V)    620 mA
Max out per port output (input 30-57 V)    420 mA
Max total out (A)    2.59 A
Total output current    2.28
Total output power    120

Ethernet
10/100/1000 Ethernet ports    7
Number of 1G Ethernet ports with Reverse PoE (PoE-in)    7
Number of 2.5G Ethernet ports    1
Number of 2.5G Ethernet ports with PoE-out    1

Fiber
SFP+ ports    1

Peripherals
Number of USB ports    1
USB Power Reset    Yes
USB slot type    USB 3.0 type A
Max USB current (A)    1.5

Other
CPU temperature monitor    Yes
Current Monitor    Yes
PCB temperature monitor    Yes
Voltage Monitor    Yes

Certification & Approvals
Certification    CE, EAC, ROHS
IP    66

Included parts
Hose clamp 1
K-41 fastening set
K-85 fastening set