×

Click for
Table of Contents

menuUDM Quick Start Guide

Package Contents

UDM
AC Power Cord

System Requirement

Either of the following is required:

Hardware Overview

System LED

White

Device is ready to be configured

Flashing White

Device is booting up

Device is initializing/deinitializing

Heartbeat White

Firmware update in process

Blue

Device is configured and ready

Slow Flashing Blue

Client connected to device via Bluetooth (BLE)

Flashing Off/White/Blue

Device is in recovery mode.

The LED will cycle through a pattern at one-second intervals, between off, white, and blue.

LAN (Ports 1-4)

RJ45 switch ports support 10/100/1000 Ethernet connections for the LAN (Local Area Network). By default, they are set to DHCP Server with the fallback IP address, 192.168.1.1/24.

Internet Port

The RJ45 port supports a 10/100/1000 Ethernet connection. Set to DHCP Client by default.

Power Port

Connect the included AC Power Cord.

Reset Button

Resets to factory defaults. The device should be running after bootup is complete. Press and hold the Reset button for about 10 seconds until the System LED becomes solidly lit light blue. After a few seconds, the LED will turn off, and the device will automatically reboot.

Installation Requirements

Use Category 5 (or above) UTP cabling approved for indoor use.

Hardware Installation

Note: You can use Bluetooth on your smartphone to set up the device.

Configuration

You have the following options:

UniFi Network App

  1.  
  2. Follow the on-screen instructions.

Chrome Instructions

Use the Chrome web browser to set up your device.

  1. Ensure that your host system is on the same Layer 2 network as the UDM.
  2. Launch the Chrome web browser and go to https://setup.ui.com

  3. Follow the on-screen instructions of the Setup Wizard.

You can manage your network and view network statistics using the UniFi Network Controller management interface. For information on using the UniFi Network Controller software, refer to the User Guide located on our website at: ui.com/download/unifi

Specifications

UDM

Dimensions

ø110 x184.2 mm

(ø4.33 x 7.25")

Weight

1.05 kg

(2.32 lb)

Networking Interfaces

(4) 10/100/1000 RJ45 Ports

Max. Power Consumption

26W

Power Method

AC Power Cord

Power Supply

Internal AC/DC Power Adapter,
(24V, 0.6A)

Supported Voltage Range

100 - 240VAC

LED

System Status

Operating Frequency

2.4 GHz

5 GHz

Max. TX Power

2.4 GHz23 dBm
5 GHz30 dBm

Antenna

(1) Dual-Band, Quad-Polarity Antenna

Antenna Gain

2.4 GHz3 dBi
5 GHz4.5 dBi

Wi-Fi Standards

802.11 a/b/g/n/ac/ac-wave2

Wireless Security

WEP, WPA-PSK,
WPA-Enterprise (WPA/WPA2, TKIP/AES)

Operating Temperature

-10 to 45° C (14 to 113° F)

Operating Humidity

5 to 95% Noncondensing

Certifications

CE, FCC, IC